Transmission Gear Parts Machined Parts
Focus on transmission gear parts, make the best gear supplier. Transmission gear is widely used for automotive parts, hydraulics, compressors, industrial equipment, transmission parts, etc.
SAE1020, SAE1045, Cr12, 40Cr, Y15Pb, 1214L, etc.
20CrMnTi, 16MnCr5, 20CrMnMo, 41CrMo, 17CrNiMo5, etc.
HPb59-1, H70, CuZn39Pb2, CuZn40Pb2, C38000, CuZn40, etc.
Gear Hobbing, Gear Milling, Gear Shaping, Gear Broaching, Gear Shaving, Gear Grinding, Gear Lapping
CNC Turning-Milling Machining, Grinding, Boring, Casting Machining
Outer Diameter: ±0.005 mm
Length Dimension:±0.05 mm
1.0, 1.25, 1.5, 1.75, 2.0, 2.25, 2.5...., etc.
Turning and Milling: +/- 0.002mm(+/-0.000098 inch)
Wire Cutting: +/- 0.002 mm (+/-0.000098 inch)
Heat Treatment, Surface Treatment, Finish
Hardening and tempering, Carburizing & Quenching, High frequency quenching, etc.
Blacking, Polishing, Anodization, Chrome Plating, Zinc Plating, Nickel Plating, etc.
T/T, L/C, Western Union
|Water absorption 24hrs||ISO 62||%||2.5|
|Heat deflection temperature - HDT/A||ISO 75A||ºC||95|
|Min. service temperature||ºC||-30|
|Max. service temperature||ºC||105|
|Thermal conductivity at 23 ºC||DIN 11359||W/(K*m)||0.23|
|Coefficient of linear thermal expansion||ISO 11359||10-4*K-1||0.8|
|Flammability Rating(6mm thickness)||UL 94||-||HB|
|III.Mechanical Properties at 23ºC|
|Tensile strength at yield||ISO 527-2||MPa||80|
|Tensile strength at break||ISO 527-2||Mpa||-|
|Elongation at break||ISO 527-2||%||3|
|Modulus of elasticity after tensile test||ISO 527-2||MPa||3,300|
|Modulus of elasticity after flexural test||ISO 178||MPa||-|
|Hardness - Shore D||DIN 53505||84|
|Charpy impact strength||ISO 179||kJ/m2||N. B.|
|Friction coefficient||DIN 53375||0.36|
|IV.Electrical Properties at 23ºC|
|Dielectric constant at 1 MHz||IEC 60250||106Hz||3.70|
|Dielectric loss factor at 1 MHz||IEC 60250||106Hz||0.03|
|Volume resistively||IEC 60093||Ohm (Ω) * cm||≥1015|
|Surface resisively||IEC 60093||Ohm (Ω)||≥1013|
|Dielectric strength||IEC 60243-1||kV/mm||50|
|NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m|
Scope of business
CNC Machining,CNC Turning,CNC precision machining,machine work,Precision components,CNC Medical parts,CNC Turning Communication parts,CNC Turning Auto parts,CNC Turning Hardware tools,CNC Turning Precision manufactured,CNC Turning Axle or Shaft machining,Printer fittings parts,Motor drive shaft and fittings,Radio-frequency unit parts.etc.
1). Over 10 years’ experience on designing, developing and manufacturing, we have confidence on any kinds of projects in our products.
2). Company covers an area of about 4200 square meters and have various type of large precision machining center, complete production equipment, we are the factory.
3). All of our products to meet the standard of CE, ISO Standard.
4). Factory directly supply, high quality with competitive price.
Q1: How long is the delivery time?
A1: It would be 15-20 working days after receiving your balance payment, for customized products according to clients specific requirements need to check the production time.
Q2: Do you arrange shipment for the gear parts machined parts?
A2: For FOB or CIF price, we will arrange shipment for you. For EXW price, clients need to arrange shipment by themselves or their agents.